Skip to content
Lone figure on a cliff edge above a glowing valley

Fabrics, fit and materials, developed and tested in-house.

How we think

Tennis balls scattered beneath a net

Fabrics

Breathable knit structures move air and moisture away from the skin, while stretch yarns recover their shape after every movement. We map each garment for heat and sweat, then place the most open fabrics exactly where the body needs them.

Rowing boat cutting across grey water, black and white

Aerodynamics

Panel placement, seam direction and surface finish all change how a garment moves through air and against the body. We test fits in the riding and running positions, not on a mannequin, and refine them until nothing flaps or drags.

Rowing crew in a boat on black water seen from above

Fit and construction

Flat-lock seams, bonded edges and body-mapped patterns reduce rubbing and bulk. Every size is graded so that fit and performance stay consistent from the smallest to the largest garment in the range.

Our development targets

-18%
Garment weight versus the previous generation
3x
Faster moisture transfer in our lightest knits
500+
Wash cycles our core pieces are tested to survive

How we test

Every garment goes through the same loop: measure it in the lab, wear it in the field, then take it apart and check what failed. Fabric samples are tested for airflow, stretch, recovery and abrasion. Finished garments are tested for seam strength, colour fastness and fit.

Why wear trials matter

Numbers can only tell you so much. We ask athletes and teams to train in prototypes and report back on rubbing, heat, movement and comfort. The best ideas usually come from a short comment after a session.

Always improving

Nothing is ever finished. The results from each season feed directly into the next range, so every generation of JISDO apparel is lighter, cooler or tougher than the last.

The science of staying comfortable

Comfort in sport is a combination of temperature, moisture, friction and freedom of movement. When these are in balance, you stop noticing your clothes. When one goes wrong, it is the only thing you notice. Our technology work is about keeping all four in balance across the widest range of conditions and activities.

Temperature is managed by how fabrics move heat and air. Moisture is managed by how quickly they move sweat away from the skin and let it evaporate. Friction is managed by seam position, edge finish and fabric surface. Freedom of movement is managed by stretch, recovery and pattern shape. Each factor has measurable properties, and we measure them.

From fibre to finished garment

Everything starts with the fibre. We use a range of synthetic and recycled fibres chosen for their strength, softness, stretch and drying speed. They are spun into yarns, knitted or woven into fabrics and finished with treatments that improve properties such as water repellency, softness or odour control.

Knit structure matters as much as the fibre. An open mesh moves air quickly but is less smooth against the skin. A dense knit is smooth and supportive but holds more heat. Many of our garments use both, with open zones where heat builds up and dense zones where support or a clean surface is needed. This mapping of fabric to body is one of the biggest contributors to comfort.

Patterns that follow the body

Patterns are drawn around the body in motion, not at rest. We study where the body flexes, where it generates heat and where it rubs, then place seams, panels and stretch zones accordingly. A seam moved by a centimetre can remove a source of irritation, and a panel angled differently can make a garment move with the body instead of against it.

We also design for different body shapes. Patterns are graded across the size range and tested with people of different shapes and sizes, so a garment performs consistently for the person wearing it, not only for the sample size.

Sustainable materials without compromise

Recycled and responsibly sourced materials are central to our plans, but only if they perform. Every material change goes through the same testing as the original: airflow, stretch and recovery, abrasion, colour fastness and wash durability. If a recycled fibre does not match the performance of the one it replaces, it does not go into the range.

We also design for durability and repair, because a garment that lasts twice as long has half the impact per wear. Reinforced stress points, robust seams and colourfast finishes are part of the technology, not an afterthought.

Open questions and continuing work

We do not claim to have solved everything. We are still looking for better ways to recycle blended fabrics, to reduce shedding of microfibres in washing and to measure the real-world impact of our products. We work on these problems with suppliers, universities and test partners, and we will share what we learn.

If you work on materials, textile technology or testing and would like to collaborate, get in touch through the contact page.

How to read our claims

We try to be careful about performance claims. Where we give a number, it comes from a repeatable test and is described as a development target or a result as appropriate. Where we describe a feature, we aim to explain what it does and why. If you find a claim you think is unclear or unsupported, tell us and we will look into it.

Glossary

Airflow is the rate at which air passes through a fabric. Recovery is how completely a fabric returns to shape after stretching. Abrasion resistance is how well a fabric withstands rubbing. Colour fastness is how well colour holds up through washing, sweat and light. Flat-lock is a seam construction that lies flat against the skin. Body mapping is designing a garment around where the body flexes, heats and rubs.

We collaborate with teams, clubs and suppliers on materials and fit.

Get in touch